• Large print
• Print this
• E-mail this

Three (3) sets of plans are required to be submitted to the Building Department one week prior to the Wednesday meeting. Any plans that need to be resubmitted must follow the same procedure.

At a minimum, the following items must be shown on the site plan.

1. Name of submitted Project
2. Address of project
3. Vicinity map
4. Owner, Developer, Engineer, Architect or Surveyor
5. Engineer, Architect or Surveyor certification stamp/ signature
6. Zoning of property
7. Flood data, Flood Insurance Rate Map & M.O.E.
8. North arrow & scale (between 1"=20' and 1"=100')
9. Site Plan showing legal boundaries & survey markers
10. Existing trees (6" caliper or greater plus critical root zone)
11. Streets (label R/W & pavement dimensions)
12. Sidewalks (existing & proposed plus ADA details)
13. Buildings and/or additions (dimensions & setbacks)
14. Building first floor elevation & corner grade elevations
15. Building square footage (fire protection & PUD)
16. Off-street parking (9'x 20' or 180 sq' ft. minimum) plus ADA
17. Driveway apron (City of Fairfield Standard - Type C)
18. Easements (utility, access, drainage, landscape, etc…)
19. Water utility - domestic (size, type, meter, thrust blocking)
20. Fire protection utility (size, type, nearest hydrant)
21. Sanitary sewer (size, slope, percent, inverts, clean out, sampling)
22. Storm sewer (size, type, inverts, catch basin - ODOT Type)
23. Storm water detention and drainage plan with flow arrows
24. Contour Map - existing and proposed final grade topo
25. Sedimentation & erosion control plan with details
26. Landscape Plan (buffering and plantings)
27. Dumpster (access, shown on a concrete pad, screened) plus details
28. Temporary construction entrance (location & detail)
29. OEPA - National Pollution Discharge Elimination Systems permit (NPDES)
30. Butler County Regional Airport - FAA zoning restrictions

For any questions please contact Mark Parker, Development Manager, at (513) 867-5345.